Use and maintenance manual
Chipping machine BF150
17
3
TRANSPORT AND LIFTING
BF150 C models can be hooked up and transported using the tractor's three-point hitch.
For connection to the tractor see next section.
The chipping machine can be moved by crane, using approved hooks and ropes suitable for the weight
of the machine itself.
The machine can be lifted with the supply duct in either the open (working) or folded position.
ATTENTION!
Pay the utmost attention and caution when loading and unloading the machine.
These operations must be carried out by qualified personnel (slingers, forklift
drivers, etc.).
All machines can be lifted and transported by crane or hoist, using
hooks and ropes (approved and suitable for the weight of the
machine) which must be hooked to the appropriate ring indicated
by the pictogram on the machine. Use a secure hook (i.e.,
carabiner hook) for lifting.
ATTENTION! – DANGER!
It is forbidden to pass through or stand under the lifted load during lifting.
It is forbidden to leave the lifting device with the lifted load.
If the machine is to be loaded onto another means of transport (e.g., a trailer), it must be securely tied
and fastened to the platform by means of lashing ropes.
