Large
Hexagon
Wrench
(Fig. 8)
(Fig. 9)
(Fig. 10)
S T E P 2
Umbrella Assembly
Two-persons recommended for team lift and to complete assembly.
With base lid in place, insert the main frame back onto the rotating hub (Fig. 8) {align tilt
lever with foot pedal}. Assembled in upright position, re-insert the removed bolt and washer
and tighten using large hexagon wrench provided (Fig. 9). Insert crank handle into housing
and tighten with hexagon wrench by turning clockwise (Fig. 10).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your AG7813 umbrella is now ready to operate!
1
2
Page 5 of 10
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
