Ballard Designs JU031 Assembly Instructions Download

Page: 4 / 4

Operating Umbrella

Page 4 of 4

clockwise

counter

clockwise

To Open

: From closed position, crank

handle clockwise until Canopy is extended

to desired height.

To engage Tilt

: Once Canopy is open, keep cranking clockwise

until Canopy begins to tilt. Stop cranking handle once

desired tilt has been reached. NOTE: Maximum Tilt 35 degrees.

To return to upright position

: Crank handle counter

clockwise to return Canopy upright..

To Close

: Crank handle counter clockwise until Canopy has

reached maximum closure. Wrap and secure ties on

closed Canopy.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Summary of Contents for JU031

Page 1: ...367 2810 Online www ballarddesigns com Close Umbrella and secure ties during windy conditions or when Umbrella is not in use Umbrella must be anchored and secured in a 50lb minimum Umbrella Base WIND...

Page 2: ...rely in pocket total of 8 arms pockets Frame Finial Crank STEP 4 Reattach finial by turning it clockwise into frame extrusion STEP 5 Slowly crank handle clockwise partially open umbrella to ensure can...

Page 3: ...4 Removing Canopy STEP 1 Unscrew finial counterclockwise from top of umbrella frame STEP 2 Gently pull downward on arm pockets removing canopy from frame total of 8 arms Metal Ring in Canopy Finial ST...

Page 4: ...ranking clockwise until Canopy begins to tilt Stop cranking handle once desired tilt has been reached NOTE Maximum Tilt 35 degrees To return to upright position Crank handle counter clockwise to retur...