Page 3 of 3
STEP 1: ATTACH SHADE
NOTE: Unplug lamp prior to installation or removal. Turning off switch is not sufficient.
Gently remove Socket Ring (B) from Socket.
Slide Shade (A) over Socket and replace and
tighten Socket Ring by turning clockwise.
NOTE: Do not over tighten.
STEP 2: INSTALL BULB
STEP 3: CHARGING
Gently turn bulb into socket. Socket has
been rated up to a 60 Watt MAX
Type A INCANDESCENT Bulb (NOT Included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
(A)
(B)
*NOTE: If you need more brightness than an
incandescent 60W switch to a higher
equivalent LED or CFL bulb, which can provide
4-5 times the illumination (lumens) without
exceeding your fixture's maximum wattage.
USB port also available for charging a
device. Do not overcharge.
NOTE:
To protect and preserve battery
memory, do not store or leave phone on Qi
charger for long periods.
