Ballard Designs STAKED TWINKLING FRASIER FIR TREE 4FT Assembly Instructions Download

Page: 3 / 4

Page 3 of 4

STEP 3: Start with the bottom most layers of branches closest to the pole and lift each tip up and

out in alternating directions. Repeat for each branch.

STEP 2: Insert tree stake on the ground and then connect with the tree body. Plug the power

adaptor to electrical outlet.

***

1. If entire Tree does not light, make sure the power cord is inserted in a working outlet.

2. Check the plug connections on the tree, control box and power adaptor.

TROUBLESHOOTING:

STEP 1: Attach the Top Section (C) to the Bottom Section (D). Plug the Top Section light strand into

the Bottom Section

************ ************ ************ ************ ************

op Section (C)

Bottom Section (D)

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Summary of Contents for STAKED TWINKLING FRASIER FIR TREE 4FT

Page 1: ...CHINA NOTE Before use or reuse inspect the Tree carefully to ensure there are no cut damaged or frayed wire insulation or cords exposed copper wire loose connections or cracks in the light holders or...

Page 2: ...om Section D Ltr C D 1 1 E 1 Qty Components REQUIRED TOOLS Two person assembly suggested Remove all parts hardware and protective packaging from carton and carefully arrange on a clean level padded su...

Page 3: ...body Plug the power adaptor to electrical outlet 1 If entire Tree does not light make sure the power cord is inserted in a working outlet 2 Check the plug connections on the tree control box and powe...

Page 4: ...Power ON Power OFF Lights steady ON with timer functions 6 hours ON 18 hours OFF Lights random twinkle with timer functions 6 hours ON 18 hours OFF Press ON OFF button once OPERATION Control box Pres...