12
InWlation and deWlation procedure
INFLATION
Ballistic
®
produces both fully inQlatable and semi rigid boats. Both ranges have similar fundamentals of safekeeping once
inQlated; however, the procedure to assemble is more detailed.
Ballistic
®
uses top quality valves imported from Italy; these valves are especially designed for safe and comfortable use.
The valve is designed Qlat to increase the comfort in the boat and to prevent any damages to the boat.
OPERATION OF THE VALVE:
•
Take off outside cap; the valve is closed when the middle screw is in upside position.
•
To open the valve put your Qinger in the middle of the valve and push the middle screw down, turn your
Qinger anti-clockwise until the screw LOCKS.
•
To close the valve, push the screw and turn your Qinger clockwise until the screw comes up.
PUMP CONNECTION:
•
Put the piece of the pump on the valve.
•
Turn right (clockwise) and start pumping.
•
Keep pumping until no air can be put into the boat, maximum of 0.3 Bar.
•
When ready,
be sure to take
off the pump.
Summary of Contents for 4.3
Page 20: ...19...
