EN
L-L 234.00-BM
27 / 40
8. MOUNTING THE SIDE 1-WAY AIR OUTLET
• Open the box containing the air outlet fitting and remove the side
panel P with hole and cover;
• Unscrew the fastening screws of the side panel and replace it with
the side panel P containing hole and cover Q
• Reverse the position of the 1-way air outlet and the cover Q as
shown below
Warning
The 1-way air outlet is approved to function only when
mounted on the side as in the previous figure.
9. MOUNTING THE SIDE 2-WAY AIR OUTLET
• Open the box containing the air outlet fitting and remove the 2-
way air outlet fitting;
• Unscrew the fastening screws of the side panel and replace it with
the 2-way air outlet fitting.
Warning
The 2-way air outlet is approved to function only when
mounted on the side as in the previous figure.
10. MOUNTING THE AIR INLET
• Open the box containing the air inlet fitting and remove the panel;
• Secure the panel to the machine by using the screws supplied.
11. CONVERTING AN UPRIGHT ASSEMBLY
To orient the machine horizontally:
• secure it on a sufficiently sturdy support surface
• remove the 4 support feet and 4 upper coupling brackets and
reassemble the support feet on the shorter base
• turn the machine over
• refit the coupling brackets
The air intake and outlet accessories must be mounted as shown in
the following figures:
AIR INTAKE
1-WAY AIR OUTLET
SIDE 1-WAY AIR OUTLET
SIDE 2-WAY AIR OUTLET
P
Q
P
