Operating Manual
Inductive Positioning System BIP AD0-B014-01-EP02
No. 872877 EN E16
1
Safety instructions
This analog positioning system must not
be used in applications in which the safety
of persons is dependent on the function
of the system (not a safety component in
accordance with the EU Machinery Directive).
Read this manual carefully before commissioning.
Function
The system detects the position of the position encoder
within the taught measuring range and outputs this
position as a current signal in the range
0…10V. Here,
the red LED indicates that the value is outside of the
measuring range. The green LED illuminates if the
position encoder is located within the measuring range.
Use the programming button to change the measuring
range as well as measuring direction.
(see "Programming" and "Characteristics")
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Germany
Phone +49 7158 173-0
Fax +49 7158 5010
service@balluff.de
www.balluff.com
Compact design
Analog output - voltage (U)
Non-contact
High repeat accuracy
High temperature stability
High linearity
