81
deutsch
81
E
Housing
Metal
Dimensions
190 x 120 x 60 mm
Weight
820 g
Ambient temperature
0 °C to +60 °C
Integral connector X1
5-pin (male)
Integral connector Head 1, Head 2
4-pin (male)
Round connector for X2
9-pin (female)
Round connector for X3
9-pin (male)
Integral connector X4
4-pin (male)
Protection class
IP 65 (when connected)
Supply voltage V
S
DC 24 V ± 20 %
Ripple
≤
10 %
Current draw
≤
400 mA
Connections for supply voltage V
S
with installation remote bus
at
I
NTER
B
US
input X3, output X2
with remote bus
at input X1
Output X2, input X3,
I
NTER
B
US
serial interface for remote bus station,
Ident-No. 03, 16 bytes IN, 16 bytes OUT
(with BIS C-621 mode: 8 Byte IN, 8 Byte OUT)
Head 1, Head 2, Read/Write Head
via integrated adapter with 2 x 4-pin connec-
tors (male)
for all read/write heads BIS C-3_ _
with 4-pin connector (female),
excluding
BIS C-350 and BIS C-352
BIS C-6021
Technical Data
Dimensions, weight
Operating conditions
Connection type
Enclosure
Electrical
connections
C60_1-023_819395_0508_en.p65
82
82
E
Digital input X1 (+IN, –IN)
galvanically isolated (optocoupler)
Control voltage active
4 V to 40 V
Control voltage inactive
1.5 V to –40 V
Input current at 24 V
11 mA
Delay time, typ
5 ms
Service interface X4
RS 232
BIS operating states
LED red / green
Ready / Bus active
(LED in housing)
LED green / yellow
CT1 Present / Operating
LED green / yellow
CT2 Present / Operating
I
NTER
B
US
state
LED green
Reset
(LED on side
LED green
Cable Check
of housing)
LED green
Bus active
LED yellow
Remotebus Disable
BIS C-6021
Technical Data
Electrical
Connections
(continued)
Function Displays
The CE-Mark is your assurance that our products are in conformance with the
EC-Guideline
89/336/EEC (EMC-Guideline)
and the EMC Law. Testing in our EMC Laboratory, which is accredited by the DATech for
Testing of Electromagnetic Compatibility, has confirmed that Balluff products meet the
EMC requirements of the Generic Standard
EN 61000-6-4 (Emission) and EN 61000-6-2/3/4/5/6 (Noise Immunity).
