Balluff BIS U-870, Technical Description, User'S Manual

Handheld Programmer

BIS U-870

10

Getting started

3

Turning on

Turning off

3.5  Turning the 

Handheld 
Programmer 
(Workabout Pro 
G2) on/off

Turning on

Turning off

3.6  Keyboard, 

display, and 
operating 
concept

3.7  Creating your 

own operating 
interface

Attention!

This is a Class A product. When using this product indoors, the device may cause RF 

interference, requiring the user to take appropriate measures.

Hold down 

►

<Power>

 for at least 1 second. 

As soon as the LED flashes green, release the 

<Power>

 button again.

The start screen <Today> is displayed.

⇒

Note

If the device was used previously, it may be in Suspend mode; press 

<Power>

 to 

reactivate the unit. The screen in which you were working before the computer 

switched to Suspend mode is displayed again.

 – Suspend mode –

Press the 

►

<Power> 

button to turn off the WORKABOUT PRO 3

or
Select 

►

„Shutdown > Suspend“

 from the Start menu.

Requirements:

Supply voltage is present (battery pack inserted and charged, device is in the docking station 

–

or power supply is connected).

–

Attention!

This is a Class A product. When using this product indoors, the device may cause RF 

interference, requiring the user to take appropriate measures.

Hold down 

►

<Enter>

 for at least 1 second. 

As soon as the LED flashes green, release the 

<ENTER>

 key again.

The start screen <Today> is displayed.

⇒

Note

If the device was used previously, it may be in Suspend mode; press 

<ENTER>

 to 

reactivate the unit. The screen in which you were working before the computer 

switched to Suspend mode is displayed again.

 – Suspend mode –

Press 

►

<FN>

 (blue) and then 

<ENTER> 

to shut off the WORKABOUT PRO G2

or
Select 

►

„Shutdown > Suspend“

 from the Start menu.

Familiarize yourself with the operating concept and characteristics of the WORKABOUT PRO. 
The operating manual can be found on the included CD or on the Internet at: 

http://www.psion-

teklogix.com/

Note

The UHF CAEN Reader software development kit can be used to create a custom 

user interface. The software development kit can be downloaded from 

http://www.

psion-teklogix.com/

.