BIS V-6107 TCP/IP, USB
Processor Unit
10
– 1x processor unit BIS V-6107
– 1x grounding set
– 5x end caps
– User's manual
– Safety Notes
For information about available software and accessories visit
www.balluff.com
.
The processor unit is the link between data carrier and controlling system. It manages two-way
data transfer between data carrier and R/W head and provides buffer storage.
The processor unit uses the read/write head to write data from the controlling system to the data
carrier or reads the data from the carrier and makes it available to the controlling system.
Host systems may be the following:
– a control computer (e.g. industrial PC)
– a PLC
In order to increase data integrity, data transfer between the data carrier and processor unit and
the storage device must be monitored using a check procedure.
A CRC_16 data check can be enabled for this via parameter configuration.
With the CRC_16 data check, a check code that allows the validity to be checked at any time is
written to the data carrier.
A CRC_16 data check provides the following advantages:
– Data integrity even during the non-active phase (data carrier outside the R/W head)
– Shorter read time – page is read once
The BIS V-6107 processor unit provides the application interfaces Ethernet TCP/IP and USB. By
design these transmission media already have their own security procedures which run in the
background of the controller or PC. In addition the user data of the serial Balluff protocol are
verified using a simple
Block Check Character
, see
Section 9 Protocol on page 45.
3.3 Scope of delivery
3.4 Software and
accessories
3.5 Control function
of the processor
unit
3.6 Data security of
the data carrier
3.7 Data security of
the application
interfaces
3
Basic knowledge
Summary of Contents for BIS V-6107
Page 2: ...www balluff com ...
