44
english
BIS V-830-3-011-B-00_ / BAM MD-IS-001-0005 / HF/LF-RFID-App (BIS M/L/C) /
BIS U-830-4-011-H-_/ BIS C-830-4-011-A / BIS M-830-4-011-A
Mobile RFID devices
Further data can be found at
www.balluff.com
on the product page.
8.1
Basic device
8.1.1 General features
Display
5" TFT color display with LED backlight,
1280 x 720 pixels, 400 cd/m
2
3 status LEDs
Touchscreen
Capacitive touch, surface hardness 7H
Code scanner
2D short-range scanner (SE4770)
integrated in housing (scanner buttons
on the side)
Camera
1)
Auto-focus camera (5 megapixels) with
camera light
RFID/NFC
2)
Reader/Writer mode, Peer to Peer
mode, Card emulation
ISO14443A/B, ISO15693, MIFARE/
DESFire, Sony FeliCa
Processor
NXP i.MX8M Mini,
4× Cortex A53 (4× 1.8 GHz) and
1× Cortex M4 (1x 400 MHz)
Memory
16 GB Flash, 2 GB RAM
Operating sys-
tem
Android 9.0
Laser
Laser Class 2, complies with
EN 60825-1:2014
8.1.2 Ambient conditions
Operating tem-
perature
−20…+50 °C
3)
Storage tempe-
rature
−20…+60 °C
Charging tempe-
rature
5…35 °C
Rel. air humidity
5…90%, non-condensing
Degree of pro-
tection as per
IEC 60529
IP65
8.1.3 Operating frequencies and transmission
powers
WLAN
2.412…2.472 GHz
5.15…5.35 GHz
5.47…5.725 GHz
BT-compatible
near field com-
munication
2.402…2.480 GHz
RFID
13.56 MHz
Laser
P ≤ 1.0 mW,
λ
= 655 nm
Country-specific WLAN restrictions
– In the EU only WLAN 5 GHz band (5.15…5.35 GHz)
may be operated in indoor areas.
– In France WLAN operation in the outdoor area
(channels 8…13) at 2.454…2.4835 GHz is only
permitted with max. 10 mW.
Max. permissible transmission power
– WLAN 2.4 GHz band: max. 100 mW
– WLAN 5 GHz band: max. 200 mW
– BT-compatible near field communication:
max. 100 mW
– RFID: max. 42 dBμA/m at 10 m distance (magnetic
field strength)
8.1.4 Detection range
Barcode scanner
Barcode
Reading distance
Code 39, 3 mil
approx. 8…14 cm
Code 39, 4 mil
4)
Code 39, 5 mil
4)
Code 39, 20 mil
approx. 5…91 cm
Code 128, 5 mil
approx. 6…24 cm
DataMatrix, 10 mil
approx. 6…27 cm
RFID/NFC reader
2)
0…60 mm (depending on the data carrier and its
installation conditions)
1)
only on BIS V-830-3-011-B-001 and BIS V-830-3-011-B-002
2)
only on BIS V-830-3-011-B-002
3)
Usage at −20 °C in cold store or outdoor area is possible if the device has
been in operation for at least 20 minutes. Avoid condensation.
4)
depending on barcode width and scan angle
8
Technical data
Summary of Contents for BIS V-830-3-011-B-000
Page 2: ...www balluff com...
Page 4: ...www balluff com...
Page 50: ......
Page 52: ...www balluff com...
