Balluff BOS R090K-U-RX10-S49 Series, User Manual

www.balluff.com

5

english

2.1 

Intended use

The BOS optoelectronic sensor, together with a machine 

controller (e.g. PLC), comprises a recognition system. It is 

intended to be installed into a machine or system and 

used in the industrial sector. 
Flawless function in accordance with the specifications in 

the technical data is ensured only when using suitable 

original Balluff accessories. Use of any other components 

will void the warranty.
Non-approved use is not permitted and will result in the 

loss of warranty and liability claims against the 

manufacturer.

2.2 

Reasonably foreseeable misuse

The product is not intended for the following applications 

and areas and may not be used there:
–  In safety-oriented applications in which personal safety 

depends on the device function

–  In explosive atmospheres

–  In food applications

2.3 

General safety notes

Activities such as 

installation

, 

connection

 and 

startup

may only be carried out by qualified personnel.

Qualified personnel

 are persons whose technical 

training, knowledge and experience as well as knowledge 

of the relevant regulations allow them to assess the work 

assigned to them, recognize possible hazards and take 

appropriate safety measures.
The 

operator

 is responsible for ensuring that local safety 

regulations are observed.

In particular, the operator must take steps to ensure that a 

defect in the product will not result in hazards to persons 

or equipment.
The product must not be opened, modified or changed. If 

defects and unresolvable faults occur in the product, take 

it out of service and secure against unauthorized use.
Do not look directly into the light beam to avoid temporary 

irritation to the eyes.

2 

Safety notes

BOS R090K-_U-RX10-S49/S75/02

Optoelectronic sensors – Through-beam sensors