www.balluff.com
13
english
6
IO-Link interface (continued)
6.2
Device specification
6.2.1 Communication parameters
Tab. 6-1 describes the basic IO-Link specification for
standard variant BTL6-U101-…
Specification
IO-Link Description
Value
Transfer rate
COM3
230.4 kBaud
Minimum cycle time of device
min cycle time
0×0A (1ms)
Frame specification:
– Amount of preoperate data required
– Amount of operate data required
– ISDU
M-sequence capability:
– Preoperate M-sequence type
– Operate M-sequence type
– ISDU supported
0×1B
2 bytes
2 bytes
Supported
IO-Link protocol version
Revision ID
0×11 (version 1.1)
Amount of process data from the device to the
master
ProcessDataIn
0×87 (8 bytes)
Amount of process data from the master to the
device
ProcessDataOut
0×00 (0 bits)
Manufacturer ID
Vendor ID
0×378
Device identification
Device ID
Tab. 6-1: Device specification for standard variant BTL6-U101-…
To flexibly adjust the basic communication parameters to
the application, other device variants can be set (see
parameter
on page 17). Deviating
settings can be found in the Tab. 6-8.
6.2.2 Transfer times
The transfer times for the BTL process data depends
greatly on the master used. The maximum possible query
frequency (Master Cycle Time) is determined by the
master.
To be able to take advantage of full BTL
performance, an IO-Link 1.1-capable master
must be used.
If the master used supports the minimum cycle time set for
the BTL, the transfer time can be determined as follows:
– Transfer time, BTL to 1.0 Master =
PD volume × minCycleTime (8 ms for standard variant)
– Transfer time, BTL to 1.1 Master = minCycleTime (1 ms
for standard variant)
BTL6-U101-M _ _ _ _ -A/B/Y/Z-S4
Magnetostrictive Linear Position Sensor – Rod Style
Summary of Contents for BTL6-U101-M****-A-S4 series
