www.balluff.com
7
english
Ø 74
~80
12.5
25
25
M16x0.75
0.5 Ø 30
~80
0.5 Ø 60
Ø max. 7
~20
Ø 10.2
60
Ø 21
90
Ø 100
Ø 70
Ø 70
Fig. 3-1: BTL7... transducer, construction and function
3.1
Construction
Electrical connection:
The electrical connection is made
via a cable or a connector (see Type code breakdown on
page 21).
BTL housing:
Aluminum housing containing the
processing electronics.
Mounting thread:
We recommend assembling the
transducer on the fastening screw thread:
– BTL7-…-TB: M18×1.5
– BTL7-…-TZ: 3/4"-16UNF
– BTL7-…-TT: M30×1.5
The transducer has an additional thread at the end of the
rod to support larger nominal lengths.
3
Construction and function
1)
Unusable area
2)
Not included in scope of delivery
3)
Ø 6.1 for hook spanner Ø 74
Magnet:
Defines the position to be measured on the
waveguide. Magnets are available in various models and
must be ordered separately (see Accessories on page 18).
Nominal length:
Defines the available measuring range.
Rods with various nominal lengths from 25 mm to
7620 mm are available depending on the version:
– Ø 10.2 mm: Nominal length from 25 mm to 7620 mm
– Ø 21 mm: Nominal length from 25 mm to 3250 mm
Damping zone:
Area at the end of the rod that cannot be
used for measurements, but which may be passed over.
BTL7-TB/TZ-Cable
Mounting surface
Thread size:
TB: M18x1.5
TZ: 3/4"-16UNF
Mounting surface
Damping zone
Magnets
1)
TB: 30-1 mm
TZ: 2"-0.04"
Null point
End point
Output signal with increasing
characteristic:
Error signal
100 %
0 %
2)
1)
LED
Thr
ead
M4x4/6 deep
BTL7-TB/TZ-S32/S135
Nominal length =
Measuring range
Thread size:
TT: M30x1.5
1)
BTL7-TT-S32
Top view of the T_2-S32,
with dummy plug
BTL7-TT-Cable
TT: 30-1 mm
Magnet
BTL-P-1028-15R2)
3)
Allowable offset
Magnet to rod:
±1.5 mm
TB3/TZ3
TT3
BTL7-A/C/E/G50_-M_ _ _ _ -T_2/3-S32/S135/KA_ _/FA_ _
Micropulse Transducer - Rod Style
Summary of Contents for BTL7-A50 Series
