112
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Code 39 Set Length 1
This feature specifies one of the barcode lengths for
Code 39 Length Control on page 111
Length 1 is the minimum label length if in
For variable length decoding, a mini-
mum and maximum length may be set. on page 111
Mode, or the first fixed length if in
For fixed length decoding, two different lengths may be set. on page 111
Mode. Length
includes the barcode’s data characters only. The length can be set from 0 to 50 characters.
Table Code 39 Length 1 Setting Examples
provides examples for setting Length 1. See
for detailed instructions on setting this feature.
Code 39 Length
1 Setting
Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 Characters
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 39 LENGTH 1 SETTING
4
Scan Two
Characters
From
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
CANCEL
$CC3L1
~
DEFAULT
02 = Length 1 is 2 Characters
