175
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Plessey Set Length 1
This feature specifies one of the barcode lengths for
Plessey Length Control on page 174
. Length
1 is the minimum label length if in
For variable length decoding, a minimum and
maximum length may be set. on page 231
Mode, or the first fixed length if in
fixed length decoding, two different lengths may be set. on page 231
barcode’s data characters only. The length can be set from 01 to 50 characters.
Table Plessey Length 1 Setting Examples
provides some examples for setting Length 1. See
for detailed instructions on setting this feature.
Plessey Length 1
Setting
Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
01 Characters
07
Characters
15
Characters
50
Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two
Characters From
‘0’ and ‘1’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
CANCEL
$CPLL1
~
DEFAULT
01 = Length 1 is 1 Character
