139
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Industrial 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for
Industrial 2 of 5 Length Control on page 138
.
Length 1 is the minimum label length if in
For variable length decoding, a mini-
mum and maximum length may be set. on page 111
Mode, or the first fixed length if in
For fixed length decoding, two different lengths may be set. on page 111
includes the barcode’s data characters only. The length can be set from 0 to 50 characters.
Table Industrial 2 of 5 Length 1 Setting Examples
provides some examples for setting Length 1.
if you want detailed instructions on setting this feature.
Industrial 2 of 5
Length 1 Setting
Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 Characters
07 Characters 15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
4
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
CANCEL
$CU2L1
~
DEFAULT
01 = Length 1 is 1 Character
