163
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
GS1 DataBar™ Limited 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label of this symbology is decoded.
Code 93
The following options apply to the Code 93 symbology.
Code 93 Enable/Disable
Enables/Disables ability of reader to decode Code 93 labels.
GS1 DataBar™ Limited 2D Component =
Disable (2D component not required)
GS1 DataBar™ Limited 2D Component =
2D component must be decoded
DEFAULT
LB2D00(CR
CLB2D01(CR
Code 93 = Disable
Code 93 = Enable
DEFAULT
C9EN00(CR
C9EN01(CR