189
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
4.9.6 Maxicode
Maxicode
Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
Maxicode
Primary
Message
Transmission
Enables/disables the transmission of only the Primary Message when the Secondary Message is
not readable.
Maxicode = Disable
Maxicode = Enable
DEFAULT
$CMX-
$CMX-
Maxicode Primary Message Transmission =
Disable
Maxicode Primary Message Transmission =
Enable
DEFAULT
MXPT00(CR
MXPT01(CR