254
BVS HS-Q Series
Standard Hand Held Barcode Reader
6
Appendix A: Technical Specifications
6
Appendix A: Technical Specifications
This section contains Physical and Performance Characteristics, User Environment and Regula-
tory information.
Item
Description
BVS HS-QC (cable models)
BVS HS-QB (bluetooth models)
Physical Characteristics
Color
Black & White
Dimensions
Height 163 mm
Length 91 mm
Width 41 mm
Weight (without cable)
Approximately 5.1 ounces/145 g
Approximately 200 g (reader)
230 g (base charger)
Electrical Characteristics
Voltage & Current
Input Voltage: 4.5 - 14.0VDC
N/A
Operating (typical): 140mA
N/A
Operating (max): 380mA
N/A
Idle/standby (typical): 50mA
N/A
Battery Type
N/A
Li-Ion battery pack
Typical charge time for
full charge from full dis-
charge
N/A
6 hours with Host Power
through the micro USB cable
connection
N/A
4 hours with Base and 12V
external power supply adapter
a
a.
Charge Times are much lower when battery is within daily typical operating condition.
N/A
Max 22 hours with Base and
Host power (in this case no sup-
ply adapter is needed)
Operating autonomy
(continuous reading)
N/A
30,000 reads
(typical)
Cradle consumption
and DC input supply
range
Volt 4.75-14 VDC; Power <8W
b
;
Imax 500mA when in host/bus
powered mode
b.
Typical input current measured under factory default configuration.
Item
Description
Performance Characteristics
Light Source
LEDs
Roll (Tilt) Tolerance
Up to ± 360°
Pitch Tolerance
± 65°
Skew (Yaw) Tolerance
± 60°
