72
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Good Read Beep Type
Specifies whether the good read beep has a mono or bitonal beep sound.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable
from the list below. (Controls the beeper’s pitch/tone.)
Good Read Beep Type = Mono
Good Read Beep Type = Bitonal
Good Read Beep Frequency = Low
Good Read Beep Frequency = Medium
Good Read Beep Frequency = High
DEFAULT
$CBP-
$CBP-
$CBP-
DEFAULT
$CBP-