160
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the barcode lengths for
GS1 DataBar™ Expanded Length Control on
. Length 1 is the minimum label length if in
Variable Length: For variable length decod-
ing, a minimum and maximum length may be set. on page 231
Mode, or the first fixed length if in
Fixed Length: For fixed length decoding, two different lengths may be set. on page 231
Mode.
Length includes the barcode’s data characters only. The length can be set from 1 to 74 charac-
ters.
Table GS1 DataBar™ Expanded Length 1 Setting Examples
provides some examples for setting
Length 1. See
for detailed instructions on setting this feature.
GS1 DataBar™
Expanded
Length 1 Setting
Examples
STEP ACTION
EXAMPLES
1
Desired Setting
01 Character 07 Characters 52 Characters 74 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
4
Scan Two Characters
From
the barcodes in this
appendix to enter
numbers as you would
select digits/characters
from a keypad.
‘0’ and ‘1’
‘0’ and ‘7’
‘5’ and ‘2’
‘7’ AND ‘4’
5
Scan ENTER/EXIT PROGRAMMING MODE
$CXBL1
Select GS1 DataBar™ Expanded Set Length 1
Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character
