CineVision™ Installation and Maintenance
Chapter 1: Overview
Required Tools
MK2A-CINEV-0001 [B]
1 - 5
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
Required Parts
This installation may require the following
additional
parts:
•
Locks (quantity 5 to 7, depending on your machine configuration).
•
Category 5 network cables, for linking game controllers, if required (quantity and length
depending on your machine configuration and your floor plan).
Lock and Cam Specification
Purchase locks for installation in each machine cabinet before installing machines. Single or dual lock
configurations are possible. All lock openings are 5/8 inch (1.59 cm) by 3/4 inch (1.91 cm). The locks are
90 degree rotations. Locks 1 and 1/8 inch (2.86 cm) long can be used with spacers to maintain the 1/2 inch
(1.27 cm) lock length.
Figure 3:
Lock and CAM Details
Required Tools
This installation requires the following tools:
•
tools for locks
NOTE:
See your
CineVision™ Assemblies, Parts, and Hardware
guide for additional lock
and cam details.
TIP:
To avoid delays, purchase your machine locks well before your planned installation
date. Purchase several spare machine locks from your lock manufacturer and keep
them available.
