Chapter 2: Installation
CineVision™ Installation and Maintenance
2 - 6
MK2A-CINEV-0001 [B]
Installation Instructions
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
Powering On the Machine
Use the following instructions to start the machine:
STEP 1.
Press the main power switch to supply power to the system.
STEP 2.
Press the cabinet power switch to supply power to the cabinet components.
Figure 4:
CineVision™ Power Switch Locations
STEP 3.
If the Operating System CompactFlash has not been installed, then insert the Operating
System CompactFlash in the top socket.
STEP 4.
If the Game CompactFlash has not been installed, then insert the Game CompactFlash in the
bottom socket.
STEP 5.
Move the µ-ATX power switch to the right to supply power to the logic board.
Figure 5:
µ-ATX Power Switch Location
STEP 6.
The machine is now ready for configuration. See
Alpha Game Platform Setup and Operation
in
the
CineVision™ Operator’s Instruction Manual
for instructions.
Cabinet Power Switch
Main Power Switch
µ-ATX Power Switch
