Installation manual plugs and connectors
INNOLINQ QUICK-CONNECT (16/32A)
(07.2020)
5 / 16
Intended use
The QUICK-CONNECT system is used as a screwless quick-connect system based on the
cage clamp principle in electrical plugs and sockets.
Plugs and sockets with QUICK-CONNECT are built for professional use. The installation and
the fixed connection to the mains supply should be carried out only by trained and qualified
experts.
Any use going beyond the intended use is considered to be improper. The manufacturer is
not liable for damages resulting from improper use. Any such risk shall be borne solely by
the user.
In case of unauthorised modifications or conversions, the CE conformity becomes null and
void, and thus, also all claims for warranty. Modifications may lead to risks for life and limb
as well as damage to the plugs and sockets or loads connected.
Factory-fitted labels and markings on the plugs and sockets should not be removed, modi-
fied or blurred.
Protect against foreign bodies and impact of weather
The plugs and sockets meet either the protection degree IP44, IP54 or IP67 in accordance
with DIN EN 60529 (VDE 0470-1), depending on the respective design. Each of these mean:
– Protection degree IP44:
– Protected against solid bodies with a diameter beyond 1.0 mm, e.g. a
wire
– Protection against water sprayed from all sides
– Protection degree IP54:
– Protected against dust in damaging quantity
– Complete protection against contact
– Protection against water sprayed from all sides
– Protection degree IP67:
– Dust-proof
– Complete protection against contact
– Protection against temporary immersion
2
