4
#46572 HI-HILO-3
2. Place the Bottom Shelf (P-6)
with the insert nuts facing up
and attach Base frame (P-7)
using 4 (2-3/8”) Flat Head
screws (B).
(Do not tighten screws all the way)
3. Attach Cylinder Receiver (P-8)
to the Base frame (P-7) and the
Bottom Shelf (P-6) using
4 (2-3/8”) Flat Head screws
(B) and 4 Interior Threaded
Posts (C) as shown in
illustration # 1.
Illustration # 1 - Base Assembly
Q
P-9
P-10
Q
N
P
N
P-7
4. Attach Casters to the Base Frame
(P-7). 2 Locking casters (D) in the
front and 2 Casters (E) in the back.
Tighten Casters using Caster
Wrench (H).
5. Attach (2) each CPU Rods (P-10)
to the Right side or Left side of the
Base frame (P-7) as shown in
illustration #2.
6. Secure each CPU Rod (P-10) with (2)
each Hex nuts (Q), (2) each Flat
Washers (N), and (1) each Black
Plastic Spacer (P).
7. Slide CPU Sleeve (P-9) over ends of
CPU Rods (P-10) as shown in
illustration # 2.
Illustration # 2
P-8
P-6
B
E
D
C
P-7
B
