5
Illustration # 3
7.
P-23
C
A3
6.
8.
Place the Drawer Support (P-14) with the
large Pre-drilled holes facing up and install 2
each Cam Locks (C) in the 2 large holes .
Attach 1 Left Drawer Slide (P-22) and 1
Right Drawer Slide (P-23) to the Drawer
Support (P-14) using 8 each Screws (A3) as
shown in illustration #3.
Illustration # 4
9.
A3
P-14
C
P-22
A3
Place the Divider Panel (P-4) with the
Predrilled holes facing up and install 2 each Cam
Posts (D) in the 2 holes as shown in illustration # 4.
Attach Drawer Support (P-14) to Divider Panel (P-4)
as shown in illustration # 4. Secure by turning the
Cam Locks (C) 1/4 turn until they lock.
P-1
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
Phillips
Screwdriver
Centerline of
Edge Drilled
hole.
Arrow
17.
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
P-4
P-14
D