Mounting instructions
EN
Once the luminaire is fully mounted and placed, it may be connected to the power supply.
Place the optics:
The optic is held in place magnetically and can also be dismantled or replaced without tools.
Luminaire head with optic for optimum light guidance and glarefree direct light.
Both optics are held magnetically. Both optics must be centred in relation to the LED on the
cover in the luminaire head.
7
Important:
Do not touch the inner
surface of the refl ector!
6
Magnet holder
Luminaire head
Optic 40°
(Art. 6700-75)
Optic 60°
(Art. 6700-76)
7
Correct
Falsch
6.1
6.2
6.1
6.2
Place the lamp heads on the upper rod (magnetic holder) .
Then insert the plug contact at the end of the cable of each lamp head into one of the three possible
sockets in the upper rod . The plug-in contact must be fi rmly seated in the plug-in sleeve.
Optic
7
Incorrect
24
