ENGLISH
25 / 44
0006160028_201510
NATURAL GAS IGNITION AND REGULA-
TION
•
Bleed out the air contained in the gas piping, with due precau-
tions and with doors and windows open.
•
Open the union on the pipe near the burner and then open the
shut-off valves a little.
Wait until you smell gas, and then close the valve.
•
Wait the time necessary for the gas in the room to disperse
outside. Re-connect the burner to the gas pipeline.
•
Check that there is water in the boiler and that the gate valves
of the system are open.
•
Check that the discharge of combustion products through the
boiler gate and flue gate take places freely.
•
Check that thee voltage on the mains meets the manufacturer
requirements and that all electrical connections made at the in-
stallation site are performed properly as illustrated in our wiring
diagram.
•
Make sure that the combustion head is long enough to enter
the furnace following the measure specified by the boiler ma
-
nufacturer.
•
Check that the air regulation device on the combustion head is
in the correct position to deliver the required fuel.
•
The air passage between disk and combustion head must be
considerably reduced with minimum fuel delivery.
• Increase combustion air flow when fuel delivery increases.
•
Refer to chapter "Air adjustment on the combustion head".
•
Fit a pressure gauge of appropriate scale to the pressure intake
on the gas pressure switch (if the amount of pressure to be used
allows it, we recommend to use a water column instrument; do
not use instruments with indicator pointers for low pressures).
1
2
10
3
4
9
11
5
display_TBML_ME
1 ON / OFF main switch.
2 Thermostatic line switch
3 Display
4 Unlock or RESET button
5 Fuse.
9 Fuel fill button
10 Fuel selector switch
11 Programming keypad
Summary of Contents for 56460010
