TECHNICAL FUNCTIONAL CHARACTERISTICS
•
Combustion head with partial recycling of exhaust gasses at low
NOx emissions (class II).
•
Possibility to obtain great combustion values through combustion air
and combustion head regulation.
•
7-pole connectors for the auxiliary power supply and thermostat
connection, 4-pole connector for connecting the power electronic
regulator.
•
Combustion air intake with throttle gate for the regulation of the air
flow rate.
•
Air damper closing in pause to prevent any heat dispersion to the
flue through air regulation servomotor.
•
Main gas train, CE version, made up by an operation and safety
valve, electro-magnetic activation, valve tightness check, pressure
switch for minimum pressure, pressure regulator and gas filter.
• Flame inspection glass.
•
Flame detection by means of ionisation electrode.
•
Automatic burner control and command equipment with
microprocessor.
•
Electrical system with protection rating IP40.
•
Protection cover made of plastic material.
OPERATING RANGE
kW
mn/h (Metano)
mn/h (GPL)
mbar / hPa
BTG 3,6 - 3,6P
BTG 6 - 6P
BTG 11 - 11P
0002922221
IMPORTANT
The operating ranges are obtained from test boilers corresponding to Standard EN676 and are indicative of the burner-boiler combination.
For correct working of the burner, the size of the combustion chamber must correspond to current regulations; if not the manufacturers
must be consulted.
The burner shall not operate outside its specific operating range.
8 / 30
0006080749_202206
ENGLISH
Summary of Contents for BTG 3,6
Page 2: ......
Page 31: ...SCHEMI ELETTRICI 29 30 0006080749_202206 ITALIANO...
Page 61: ...WIRING DIAGRAMS 29 30 0006080749_202206 ENGLISH...
Page 63: ......
