ENGLISH
3 / 34
0006160209_201702
WARNINGS FOR USE IN SAFETY
CONDITIONS
PURPOSE OF THIS MANUAL
This manual is aimed at ensuring the safe use of the product
to which it refers, through the indication of the necessary
components in order to prevent the original safety features from
being jeopardized by improper or erroneous installation and by
improper, erroneous or unreasonable use.
The manufacturer accepts no liability for any damage caused by
improper installation and use or in case of non-compliance with
the manufacturer's instructions.
•
The manufactured machines have a minimum life of 10 years,
if normal working conditions are met and periodic maintenance
specified by the manufacturer is done.
•
The instruction booklet is an integral and essential part of the
product and must be given to the user.
•
The user must keep the booklet to hand for consultation when
needed.
•
Before starting to use the equipment, carefully read the
"Instructions for use" in this manual and those directly
applied to the product in order to minimize risks and
accidents.
•
Observe the SAFETY WARNINGS, avoid IMPROPER USES.
•
Installer must evaluate any RESIDUAL RISK that might arise.
•
This manual contains symbols to highlight some parts of the
text or to indicate some important specifications. You find their
description below.
DANGER / ATTENTION
This symbol indicates a very dangerous situation that, if
ignored, can seriously endanger people health and safety.
CAUTION / WARNINGS
This symbol indicates that it is necessary to behave properly
to void endangering people's health and safety and causing
economical damages.
IMPORTANT
This symbol indicates particularly important technical and
operative information that must not be neglected.
CONDITIONS AND DURATION OF STORAGE
The equipment is shipped with the manufacturer package and
transported on road, by boat or by train in compliance with the
standards on goods transport in force for the actual mean of
transport used.
The unused equipment must be placed in closed rooms with
enough air circulation in standard conditions with temperature
between -25° C and + 55° C.
The storage time is 3 years.
GENERAL WARNINGS
•
The equipment production date (month, year) is written on the
burner identification plate located on the equipment.
•
The equipment cannot be used by people (including children)
with reduced physical, sensory or mental capacities or lacking
experience or know-how.
•
The equipment use is allowed to such people only if they can
have access to, through a responsible person, the information
concerning their safety, surveillance and instructions concerning
equipment use.
•
Children must be watched over to prevent them from playing
with the equipment.
•
This appliance should only be used for the purpose it has been
designed for. Any other use is to be considered improper and
therefore dangerous.
•
The equipment must be installed in accordance with current
regulations, with the manufacturer’s instructions and by
qualified technicians.
•
The term ‘qualified personnel’ refers to those specifically trained
in the field and with proven skills, in accordance with the local
law in force.
•
An incorrect installation can cause injury or damage to persons,
animals and objects, for which the manufacturer cannot be held
responsible.
•
After removing all the packaging make sure the contents are
complete and intact. If in doubt, do not use the equipment
and contact your supplier. The packing pieces are potentially
dangerous and must be kept away from children.
•
The majority of the equipment components and its package is
made with reusable materials. The package, the equipment and
its components cannot be disposed of with the standard waste
but according to the regulations in force.
•
Before carrying out any cleaning or maintenance, disconnect
the equipment at the mains supply, using the system’s switch
and/or shut-off systems.
•
If the equipment is sold or transferred to another owner or if the
owner moves and leaves the equipment, make sure that the
booklet always goes with the equipment so it can be consulted
by the new owner and/or installer.
•
When the equipment is working, do not touch hot parts that
are usually positioned near the flame and the fuel pre-heating
system, if any. They could still be hot after the equipment is
turned off for a short period of time.
Summary of Contents for TBG 800 MC
