Juicer extractor
attachement
Make juice:
Apple, Carrot, Pear,
etc
Aqueous fruit:
Watermelon, Grape,
Strawberry,
Max.
Min.
1000g
30sec
2min.
Cleaning
- Always unplug the appliance before you remove accessories or clean the motor unit.
- You can quickly and easily pre-clean the food processor bowl and blender jar with the pulse button. Simply
add some water and washing-up liquid to the dirty bowl or jar and secure the lid. Then use the pulse button
until the bowl or jar is clean. When you pre-clean the food processor bowl in this way, make sure the food
processor blade is assembled in the bowl.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an
official collection point for recycling. By doing this, you help to preserve the environment.
Troubleshooting
Question
Answer
The appliance does not go on.
Make sure that all assembly indications (on the lid of the bowl, on the
bowl, on the blender jar and on the motor unit) are aligned.
The appliance suddenly stops
running.
The lid of the bowl may have become undone during a heavy
processing job. Close the lid properly. The appliance immediately
starts working again. The processing job is too heavy. Set the control
knob to OFF to switch off the appliance and remove the mains plug
from the wall socket. Then let the appliance cool down to room
temperature. lug in the appliance and switch it on again. Process
smaller batches.
The motor of the device runs
but cone of the citrus press
does not turn.
Please check if you have inserted the tool holder. citrus press
properly. Please check if you have attached the sieve of the citrus
press properly.(Indication on the sieve points to indication on the
handle of the bowl)
Can I clean all removable parts
in the dishwasher?
Yes, except the motor unit and the protection cap for the blade unit.
What does
‘
pulse
’
mean?
When you press the Pulse button, the appliance will run at its highest
speed a s long you keep pressing the button. Using the Pulse button
is recommended if you want to have more control over the
processing job, for instance when you are chopping.
Can I pour boiling hot
ingredients into the blender jar?
No, let the liquids or ingredients cool down to 80
°
C to avoid damaging
the accessories.
Why does the motor produce an
unpleasant smell during
processing?
It is very common for a new appliance to give off an unpleasant smell
or emit some smoke the first few times it is used .This phenomenon
will stop after you have used the appliance a number of times. The
appliance may also give off an unpleasant smell or emit some smoke
if it has been used too long. In that case you have to switch the
appliance off and let it cool down for 60 minutes.
What should I do when the blade
unit or motor gets blocked during
processing?
Switch the appliance off and use a spatula to dislodge the ingredients
that block the blade unit. We also recommend processing a smaller
quantity.
PDF created with pdfFactory Pro trial version
