5.
Put the juice collect cup and pulp collect cup under the two mouths, and then place the pusher on.
·
Juice mouth can adjust the quantity of juice with pull-out and easy to clean
Do not put spoon, chopsticks or others into the feeding mouth.
9.
It is recommended to drink the juice as soon as possible.
Chapter Four – Maintenance
1.
Turn the product “off” and unplug the power cord before cleaning.
2. Clean the machine timely after use.
3. Do not rinse the main body. Clean it with a wet towel.
6
．
Connect the power supply.
T
he product is provided with a protective switch. It will not work if the lid is not covered.
The following parts can be washed under the water or put them into water for cleanin.
Button “ON”
：
Press it, the product will begin to work. If you want to
stop, press Button “REV” to make the switch back to the "OFF" position.
Please DRY the parts after cleaning and do not forget to place back the yellow silicone pad
at the bottom of the cup.
Button “REV”
：
When something is stuck and you need to unclog, press it
and hold. The screw begins to reverse. Release the button and press Button
“ON”, it go back to normal working.
4. It should be kept in a dry place and avoid direct sunlight.
7. Wash the ingredients and cut them in small pieces, and then put the prepared ingredients into the
feeding mouth.
5. Make sure the machine is clean and dry before storing.
6. Please disassemble according to the reverse order of the assemble method before cleaning.
1)
If the ingredients are cut into small pieces, they will fall down and there is no need to use the pusher.
Sometimes you can use the pusher to help it down.
2)
Cutting hard vegetables and fruits in smaller pieces will put less strain on the machine and make
juicing easier.
8.
Press Button “ON/OFF” when juice is finished and no more juice flowing out. After the motor and
screw stop completely, take the cups away from juice mouth and slag outlet.
1.
Feeding mouth
2.
Screw
3.
Filter
4.
Cup
