Values goes from 0 to 9
0 = function OFF
9 = closure after 240 seconds
1. Press P1 and P2 simultaneously for three seconds
to begin programming the board.
2. Letter A appear on the display. Scroll the menu with P1
until letter T appears on the display.
Press P2 to confirm.
3. You should see 1 on the display. Scroll the values
with P1 until 5 will appear on the display.
Press P2 to confirm.
4. Select the value from 0 to 9 with P1
(SEE THE CHART).
5. Press P2 to confirm.
ATTENTION!!!!!! The control board has a default setting of 3 = 30 seconds.
ATTENTION!!!!!! This timing is valid also for the pedestrian opening.
PARAMETER T5 - Timing for automatic closure
Display
Seconds
0
1
2
3
4
5
6
7
8
9
OFF
10
20
30
45
60
90
120
180
240
- 12 -