Asterisk on BPI-R1
Asterisk for Banana Pi-R1 (FreePBX Image included)
After doing the FreePBX Asterisk Image for Banana Pi, I was asked by SINOVOIP (Banana Pi Manufacturer) to do an
Asterisk Image for their router board, i.e. the Banana Pi R1. SINOVOIP has been very kind to send me a complimentary
BPi-R1 for testing and developing.
It took me some time to get this done, but the image is finally ready. This image differs from my earlier Banana Pi Asterisk
image in that, the earlier image was created by simply replacing the rootfs of a Raspbian based BPi Image, with RasPBX
Image’s rootfs. However, this time I have actually been able to compile Asterisk on the latest Bananian Image for R1. This
means that you can now have a powerful, complete and rather flexible Asterisk 11 (upgradable to 12!) desktop system with
FreePBX, running on the BPi-R1. Further, Bananian offers lightening fast boot and load times with remarkable
performance. (You can compare the speed with my earlier RasPBX based Image to see for yourself.)
The image comes preloaded with Asterisk 11, along with most of the standard FreePBX modules. Upgrading to Asterisk 12
should be pretty easy.
Credentials:
Login: root
Password: root
FreePBX Username: asteriskuser
FreePBX Password: pi
Note:
I have tested this image (before and after upgrading to Asterisk 12) successfully with a BPi-R1 for SIP (using Android
devices running Zoiper), along with video calling. Please be aware that 2 extensions (made during testing) already exist in
the image and can be removed (I somehow forgot to delete them :wink:). Also note that video calling is disabled by default
and needs to be enabled from the pbx settings.
buy link:
http://dostmuhammad.com/asterisk-for-banana-pi-r1-freepbx-image-included/
Asterisk on BPI-R1
75
Summary of Contents for BPI-R1
