– Must be performed by a technician –
– Must be performed by a technician –
142
8B. Service
8B-6-1 Removing and Installing Each Part
– Must be performed by a technician –
(1) Replacing the Projector Unit – Must be performed by a technician –
z
z
In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the main power switch before starting this task.
Refer to “8A-1-1 (5) Installing the Projector Unit” on page 64 and remove the projector unit
by reversing the procedure.
Refer to “8A-1-1 (5) Installing the Projector Unit” on page 64 and install the projector unit.
After installation, adjust the projector position. (See “8B-6-2 Adjusting the Projector Position”
on page 155.)
