Manual Documentation Number: EIR610-3SFP-T_0708M
77
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
RSTP - Port Configuration
Configure path cost and priority of each port.
1. Select the port in Port column.
1.
Path Cost:
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through 200000000.
2.
Priority:
Network priority. Enter a number between 0 and 240. The value
must be a multiple of 16.
3.
P2P:
Some of the rapid state transactions that are possible within RSTP
are dependent upon whether the port concerned can only be connected
to exactly one other bridge (i.e. it is served by a point-to-point LAN
segment), or can be connected to two or more bridges (i.e. it is served
by a shared medium LAN segment). This function allows the P2P status
of the link to be manipulated administratively. True is P2P enabled.
False is P2P disabled.
4.
Edge:
The port directly connected to the end stations cannot create a
bridging loop in the network. To configure the port as an edge port, set
the port to ‘
True
’ status.
5.
Non STP:
Set
True
to disable STP mathematic calculation. Set
False
to
including the STP mathematic calculation.
6. Click
Apply
.
