background image

Documentation Number ETCIACT0698 Manual 

B&B Electronics  --  PO Box 1040  --  Ottawa, IL  61350 

PH (815) 433-5100  --  FAX (815) 433-5105

 

 

1.5   Cable Requirements 

 

10Base T:  Category 3, 4, and 5 UTP cable can be used.  Maximum 
distance for each UTP cable is approximately 100 meters (328 feet). 

 

10Base 2:

   

The connection uses RG-58 A/U thin coaxial cable.  

Requires a T connector to connect the cable to the BCN port. The last 
PC in the segment will require a 50-Ohm terminator to be attached to 
the open arm of the T connector.

 

 

 

1.6  The Driver Disk Contains the Following: 

 

Directory Contents 

 

README.TXT This 

file. 

\ENABLE Enable 

program. 

\NetWare 

Novell NetWare ODI driver programs. 

\WFW31 

Driver (NDIS v2.0) is used for Windows/Workgroup 3.1. 

\WFW311 

Driver (NDIS v3.0) is used for Windows/Workgroup 3.11. 

\WIN95 

Installation guide for Windows 95. 

\MSLANMAN.DOS 

Driver (NDIS v2.0) is used for Microsoft LAN Manager (DOS). 

\MSLANMAN.OS2  

Driver (NDIS v2.0) is used for Microsoft LAN Manager (OS2). 

\PACKET 

Packet Driver Program. 

\LANTASTI 

LANtastic/AI 4.x, 5.x and 6.0 installation guide. 

\PCNFS 

Driver (NDIS v2.0) is used for PC-NFS 5.1 System. 

\PATHWORK 

Driver (NDIS v2.0) is used for PATHWORK System. 

\VINES 

Driver (NDIS v2.0) is used for VINES System. 

\NDIS 

IBM LAN SERVER v4.0 (DOS LAN Services). 

 

IBM LAN SERVER v3.0 (DOS LAN Services). 

\WINNT351 

Driver (NDIS v3.1) is used for Windows NT 3.51 workstation. 

 
In the ENABLE directory 

 

ECARD.EXE file--------- Card enabler/Socket services client for DOS system. 
ECARDCS.EXE file  ---- Card services client for DOS system. 
ECARDHP.EXE file ----- Socket services enabler for HP Omnibook 300. 
ECARDOS2.OS2 file  --- Card enabler/Socket services client for OS2 system. 
TMI.CLB file ------------- LAN Card library file for Systemsoft 3.1. 

 
 
 

The README.TXT file is in the root directory on the drivers disk. 

Specific drivers are in there own directories. Each directory also contains a 
text file, which contains the installation for that specific driver. The Enable 
directory contains the Card Service and Socket Service files. 
 

Summary of Contents for ETCIACT











Reviews: