Documentation Number ETCIACT0698 Manual
7
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5105
3.2 Socket Services and Card Services Installation
In most cases the Operating System of your PC came with the
PCMCIA Card Service and Socket Service drivers already installed or on a
Utility disk. Refer to your PC’s manual for specific information.
The following programs are available on the driver disk for installing
Card Service and Socket Services. Descriptions and installation
instructions can be found in the ENABLE.TXT file.
ECARD.EXE file ------- Card enabler/Socket services client for DOS system.
ECARDCS.EXE file --- Card services client for DOS system.
ECARDHP.EXE file --- Socket services enabler for HP Omnibook 300.
ECARDOS2.OS2 file -- Card enabler/Socket services client for OS2 system.
TMI.CLB file ------------ LAN Card library file for Systemsoft 3.1.
3.3 Additional Software Device Driver Information
Before installing the device driver be sure that the Socket Services and
the Card Services have been installed. See section 3.2.
Detailed procedures for installing device drivers can be found on the
driver disk. Specific drivers are located in their own directory. Each
directory contains a text file that describes the installation of that device
driver in a particular Operating System. See section 1.6 for a list of device
drivers and the directory that they are located.
