Electrostatic Discharge Precautions
Electrostatic discharge (ESD) can cause damage to your add-in modules.
Always observe the following precautions when installing or handling an add-in
module or any board assembly.
1. Do not remove unit from its protective packaging until you’re ready to install
it.
2. Wear an ESD wrist grounding strap before handling any module or
component. If you do not have a wrist strap, maintain grounded contact with
the system unit throughout any procedure requiring ESD protection.
3. Hold boards by the edges only; do not touch the electronic components or
gold connectors.
4. After removal, always place the boards on a grounded, static-free surface,
ESD pad or in a proper ESD bag. Do not slide the board over any surface.
WARNING!
Integrated circuits and fiber optic components are
extremely susceptible to electrostatic discharge damage. Do
not handle these components directly unless you are a qualified
service technician and use tools and techniques that conform to
accepted industry practices.
7
