22
Chapter 5
Documentation Number: ESP902-2303 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Server Name
You can enter a new Server Name of up to 16 characters. If you have more
than one ESP901 or ESP902 Server on the LAN we recommend that you
assign a new name to each. When the ESP Manager finds ESP Servers on
the LAN it displays the server name and IP Address allowing the user to
distinguish between ESP902’s.
Password
Entering a password activates a security feature on the serial server. Once a
password is entered it will be required to access the menu and make changes.
DHCP
DHCP servers are a part of numerous LAN management systems. The DHCP
field has two selections, “Disable” or “Enable”. Select, then Tab to another
property.
Telnet/Console: Arrow to the desired selection and select enter
.
Disable is the normal/default setting. When enabled, ESP902 will send a
DHCP request to the DHCP server, which will assign a dynamic IP address,
net mask, and gateway to the ESP902. If a DHCP server is not available on
the network the ESP902 will time out after 10 seconds and the default values
will remain.
IP Address, Netmask, and Gateway Properties
The Network Administrator can provide IP Address, Netmask and Gateway
address information.
All three fields will have to conform to your LAN for proper operation.
