Page 8 of 15
58471 Fir Road, Mishawaka, IN 46544
Phone: (574) 259-7838 Fax: (574) 259-7939
www.bandbmolders.com
3. Connect plumbing harness
(Pump Inlet)
to back of Nautilus panel at two locations
marked with a . Screw plumbing swivel
fittings onto each diverter valve end labeled
"TO PUMP INLET."
5
5
4. Connect plumbing harness
(Fresh
Water Tank)
to back of Nautilus panel at two
locations marked with a . Screw plumbing
swivel fittings onto diverter valve ends in the
following order:
"TANK FILL (CITY)," "TANK
FILL (PUMP)."
1
1
INSTALLATION INSTRUCTIONS
Connections shall be hand tight + ¼ turn.
*Do not over tighten as stress cracking may result.*
Connections shall be hand tight + ¼ turn.
*Do not over tighten as stress cracking may result.*
Summary of Contents for Nautilus P1
Page 1: ......