background image

-6-

DRIVING POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 in.lbs
FASTENER TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FULL ROUND HEAD NAIL

(.131", .148")

FASTENER RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1/2"
MAGAZINE CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 NAILS
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 LBS
OPERATION PRESSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  to  120 PSI
AIR INLET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT

TOOL-FREE MULTI-DIRECTIONAL EXHAUST

The tool-free exhaust can be adjusted to any positions depending on operator preference.

LIGHT WEIGHT MAGNESIUM HOUSING

The light weight magnesium housing helps reduce work fatigue.

DRY-FIRE LOCKOUT

The drive-fire lockout extends driver life and prevents missing nails.

SEQUENTIAL FIRING

The sequential firing mechanism ensure precision nail placement.

REAR-LOADING MAGAZINE

The rear loading magazine offers quick reloading of fasteners.

PRODUCT SPECIFICATIONS

TOOL-FREE

MULTI-DIRECTIONAL

EXAUST

LIGHT WEIGHT

MAGNESIUM

HOUSING

REAR LOADING

MAGAZINE

DRY-FIRE

LOCK OUT

SEQUENTIAL

FIRING

Summary of Contents for MC150












Reviews: