WG800
Line Array Source
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
Line Array optimized Waveguide
Max. horizontal coverage 120°
220 W continuous program power capacity
75 mm (3 in) aluminium voice coil
Composite Polyimide/Titanium diaphragm
500 – 17000 Hz response
108 dB sensitivity
Specifications
Horizontal Coverage
120° max
Active Radiating Factor
93.7 %
Recommended Crossover (1)
0.8 kHz
Waveguide Material
Cast Aluminium
Nominal Impedance
8 ohm
Minimum Impedance
8.6 ohm
Nominal Power Handling (2)
110 W
Continuous Power Handling (3)
220 W
Sensitivity (1W/1m) (4)
108 dB
Frequency Range (5)
0.5 -17 kHz
Voice Coil Diameter
75 mm (3 in)
Winding Material
Aluminium
Diaphragm Material
Composite
Polyimide/Titanium
Flux Density
1.85 T
Mounting and Shipping Info
Waveguide Baffle Cutout
153x25 mm (6x1 in)
Driver diameter
124 mm (4.9 in)
Dimensions
163x130x235 mm
(6.4x5.1x9.3 in)
Net Weight
3.3 kg (7.3 lb)
Shipping Weight
3.4 kg (7.5 lb)
Shipping Box
245x140x175 mm
(9.6x5.5x6.9 in)
1
12 dB/oct. or higher slope high-pass filter.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5
Waveguide mounted on 90°x10° bell horn
Summary of Contents for Line Array Source WG800
Page 2: ......
