Fig. 50
REPLACE BATTERY WITH CR2032 ONLY
How To Use Your Opener
Removing the Battery From the Transmitter
(Battery Type: 3V Lithium Battery CR2032).
Use a non-metallic object (e.g. pen) to remove the battery.
(Fig. 50)
Inbuilt Locking Facility
DO NOT
lock your door when your opener is engaged as it
has inbuilt locking facility. With the opener engaged your
door will be locked whether the power is on or off.
Manual Door Operation
CAUTION: when operating the manual release
while the door is open. The door may fall
rapidly due to weak or broken springs, or due
to being improperly balanced. (AS3350)
CAUTION!
Do not disengage the opener to
manual operation with children/persons or
any objects including motor vehicles within
the doorway.
To disengage the opener from the door (preferably with
the door in the closed position), pull down on the string
handle on an angle towards the door. This will allow you to
manually open or close the door. To re-engage the opener
pull the string handle away from the door.
WARNING! When the opener is manually
disengaged, the door is no longer locked. To
lock the door manually, re-engage the opener
after the door is closed.
Power Failure
When there is a power failure, the opener will be unable to
automatically open or close your garage door. To use your
door whilst there is no power you will need to disengage the
opener and use the door manually – see Manual Operation
above.
Controll-A-Door
®
P
Diamond SDO-2v2
Instruction Manual
28
Summary of Contents for Controll-A-Door P Diamond SDO-2v2
Page 37: ......