51806-001 en/2021-12
15 / 43
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.1.2 Explanation of the display
fi
elds
All relevant operating parameters are shown on the LCD display (e.g.: Stand-by mode).
12:00:00 17.0°C 50%
12:00:00
17.2°C
12:00:00
Runtime
Current (remaining) runtime
for the ultrasound operation.
If [START/STOP] has not yet been pressed,
the time will correspond to the target runtime.
Actual temperature
Actual temperature in the oscillating tank
Power speci
fi
cation
Speci
fi
ed value for the ultrasonic power
during sonication (in %)
Target temperature
Speci
fi
ed value for
the temperature in
the oscillating tank
(in °C)
Target runtime
Speci
fi
ed value for the duration
of the ultrasound operation
(in hh:mm:ss format)
Note:
As soon as the ultrasonic bath is turned on, the cooling will run automatically according
to the set target temperature. If cooling is not desired, it can be temporarily deactivated
by adjusting the target temperature, e.g. by setting the temperature to 30 °C.
The ultrasound is switched on separately (see chapter 3.5).
3.2
Signals on the ultrasonic bath
Meaning of the colours of the status LED
LED Explanation
green
Ultrasonic bath is operating faultlessly.
yellow
Warning. Ultrasonic bath may still be operated, however.
red
Error (see error number). The ultrasonic bath or ultrasound cannot be started.
Newly-occurring errors are noti
fi
ed using a short audible signal and sometimes
with a blinking warning sign
.
