51806-001 en/2021-12
19 / 43
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
3.5
Activating / deactivating the ultrasound
• By pressing the "START/STOP" key, the ultrasound is turned on. This will be visually
shown on the display through a countdown of the remaining runtime.
• Pressing the [START/STOP] key once again interrupts the ultrasound emission
( pause mode).
• The ultrasound emission can be resumed ( remaining runtime) by pressing
the [START/STOP] key once again in pause mode.
By pressing the [SET] key for 2 sec, the procedure can be interrupted from
pause mode and the display values can be reset (return to stand-by mode).
• When the set time has elapsed, the ultrasonic bath will stop. The time display
will show "00:00:00" and a short audible signal will be emitted. The ultrasonic
bath will be in stand-by mode once again.
Ex.: Stand-by mode
Active mode
12:00:00 17.0°C 50%
11:59:57
17.2°C
12:00:00 17.0°C 50%
12:00:00
17.2°C
12:00:00
START
STOP
Active mode
Pause mode
12:00:00 17.0°C 50%
09:15:21
17.2°C
12:00:00 17.0°C 50%
===== p-a-u-s-e =====
09:15:21
17.2°C
09:15:21
START
STOP
