2.1
Scope of delivery
The scope of delivery will depend on the size of the order. However, it will generally include the
following parts:
1
HF Generator GM .... - see delivery note
1
Ultrasonic transducer UW ...
1
Standard horn or booster horn SH ... (already
fi
rmly screwed-in)
1
Probe
1 Instructions for Use manual
Additional accessories according to order – see delivery note
2.2
Set-up / assembly
Place the HF generator atop a
fi
rm, level and dry surface. In doing so,
•
do not group it or stack it over other electrical or electronic devices,
•
do not cover the ventilation holes on the ultrasonic transducer's housing,
•
guard against moisture and wetness - risk of electric shock.
During delivery, the standard or booster horn is already
fi
rmly screwed to the corresponding
ultrasonic transducer.
Other standard or booster horns are mountable. To do so, see instructions in chapter 4.4.
Screw together the supplied probe with the standard or booster horn, see chapter 4.3.1.
Position the ultrasonic transducer safely and correctly inside the holder.
To do so, af
fi
x the ultrasonic transducer in the sound proof box's supporting ring or
fi
rmly
mount the ultrasonic transducer on the black housing only, using a suitable support, e.g. a
stainless steel stand.
Connect the ultrasonic transducer to the HF generator.
To do so, insert the plug from the ultrasonic transducer into the HF socket located on the rear
side of the generator, and tighten using the threaded ring. If necessary, see chapter 1.
Verify that the mains switch is in the "0" position.
Before the mains connection, identify the pertinent mains voltage, compare it against the type
plate on the bottom of the generator, and only connect a suitable type to a grounded socket.
230 V~ 50/60 Hz alternatively 115 V~ 50/60 Hz
Note:
• Any contact between the contact pins on the ultrasonic transducer's jack must be avoided since
the piezo elements could generate an electric charge through temperature
fl
uctuations
⇒
with a
possibility of slight electric shocks.
14 / 44
51436a GB/2017-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
