Dismounting
Ultrasonic transducer
Standard and/or booster horn
Vigorously turn sickle spanner
HS 40/42 long, or HS 45/50 long,
in the opposite direction
4.4
Mounting and dismounting of the standard and booster horns
Standard and/or booster horns
• are screwed onto the respective ultrasonic transducer,
• are made of high-strength titanium alloy,
• transmit the oscillations to the probe,
• enhance the
amplitude thanks to their geometry.
At the time of delivery, standard horn SH 70 G and booster horn SH 213 G are
fi
rmly mounted
onto the HD 2070 and HD 2200, respectively, on the ultrasonic transducer.
Before mounting the standard or booster horn, the HF generator must be turned off and the
ultrasonic transducer must be disconnected from the HF generator.
Release
the
fi
rmly-mounted standard and/or booster horns SH 70 G or SH 213 G from
the ultrasonic transducer UW 2070 or UW 2200, respectively. To do so, lay the ultrasonic
transducer on a
fi
rm base (non-slip, if possible).
Dismounting
Place one sickle spanner on the ultrasonic transducer and the other sickle spanner on the
standard or booster horn. To dismount, press the
fi
rst sickle spanner against the
fi
rm base,
press the other sickle spanner
fi
rmly in the opposite direction.
One
sickle spanner is part of the scope of delivery of one standard or booster horn.
25 / 44
51436a GB/2017-10
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
